Phyllite/bentonite mixture-an alternative effective buffer material for a geological disposal of radioactive waste.

The use of phyllite (Phy) instead of quartz in mixtures with bentonite (B) is recommended as a buffer material for engineering barriers in a geological repository of nuclear waste. The recommendation is based on experimentally determined sorption properties of various Phy/B mixtures. The adsorption capacity of Phy/B mixtures (Phy/B: 75/25, 50/50, and 25/75), the removal efficacy of Eu(III) ions (an analog for fissiongenic lanthanides and actinides), and the rate of their binding reaction were studied using the batch adsorption equilibrium and kinetic experiments at different Eu(III) initial concentrations, solution pH, and solution to adsorbent (L/S) ratio. The adsorption capacity of the Phy/B mixtures increased with the increased bentonite content in the mixture depending on the L/S ratio and solution pH. The highest increase in the adsorption capacity of the Phy/B mixtures compared to phyllite was observed for the Phy/B proportions of 25/75 and 50/50. The rate of the Eu(III) adsorption was the best fitted by the pseudo-second-order kinetic model indicating that the adsorption rate was controlled by chemisorption. The Sips model provided the best correlation of the adsorption experimental data, indicative of more than one adsorption site. The results of this study show the advantage of the Phy/B mixtures in immobilizing Eu and certain fission products by combining adsorption properties of the materials.

Dust-particle migration around flotation tailings ponds: pine needles as passive samplers.

The potential use of dust particles trapped on Scots pine needles for tracking dust migration around flotation tailings ponds in the Silesian-Krakowian ore district, Southern Poland was tested. 1-, 2- and 3-years old needles were studied using a scanning electron microscope and energy dispersive X-ray microanalysis. Particle sizes and morphologies, and the nature of the compounds hosting metals ions, were examined. A large majority of the particles examined are <10 microm in size. Almost 80% of particles represent respirable dust. All the components in the flotation wastes appear among the chemical compounds identified in particles on the pine needles. The quantity of the waste particles decreases with distance from the flotation tailings ponds. The analysis of dust particles on pine needles could be a useful method for estimating vectors and travel distances of suspended dust migrating around open flotation tailings ponds and around other point sources emitting dust particles with chemical compositions differing from the environmental background.